You might have bought an old property, and you’re thinking of changing the wires and electrical outlets for the whole family’s safety. If so, it’s best to call an electrician for the electrical work because it’s too dangerous to work with electricity, especially if you don’t have any experience in this kind of work. Learn more about electricians on this site here.
If you need repair or upgrades, the contractors in Abbotsford can provide you with what you need. They have the expertise, training, tools, skills, and knowledge to handle outlets and plugs. They know how to change the wires without getting electrocuted safely, and they have insurance that will cover them in the event of accidents.
Most homeowners today may also need to update their technology or add circuit breakers for some of their appliances. Technology is fast-paced, and if you’ve recently bought a new appliance, there’s a good chance that you need to do an upgrade so your electrical system can handle the additional loads and prevent setting your house on fire. Here are other reasons why you should call the electricians in Abbotsford.
Reasons to Call the Contractors
-
Your System Always “Puts you in the Dark”
This is usually a case of your circuit breaker that’s often tripping. Suppose you’re regularly experiencing circuits that are drawing more current than what the system can safely provide or see blown fuses. In that case, these are indications that your family and house are in danger. One of the circuits may have a dangerous fault, and you need to contact an electrician to fix this.
-
Waning or Flickering Lights
When you switch on your hairdryer, you start to notice that your vanity lamps dim slightly for a second. This is where you call a 24/7 electrical company in Abbotsford to know what’s going on. If you turn on your HVAC systems, you also notice that the ceiling lights begin to flicker. Many of these appliances draw massive current flows, and they should be put into their own dedicated outlets and circuits. If you notice that the smaller appliances are causing the issues, you may want to get help from the pros to add a 20-amp line for additional service inside your home.
-
Octopus found in Various Outlets
Sometimes, a home has many occupants that need electricity, but there are a few outlets available. This is where the multi-receptacle and plug strip addons come into the picture. If the outlets are already strangling each other and work far beyond what they are capable of, you may need a thorough assessment done by electrical contractors in Abbotsford. This is to ensure that the additional outlets are safe. Get more info about outlets in this link: https://energyeducation.ca/encyclopedia/Electrical_outlet.
-
Rug Bumps are Everywhere in the Carpet
You might have a good look in your living area and notice that there are rug bumps everywhere. The place may look like a snake farm where wires are under the furniture, rugs, and pots. Know that this is a dangerous situation to be in, and this should mean that you need to install additional outlets in your home because they are already too far from each other. This also indicates the replacement of the outlets with the help of an experienced electrician.
-
Three-Pronged Plugs
When buying a new appliance, some people discover that they consist of three-pronged grounded plugs. These are not accepted in most outlets found in older homes. This is an issue where you can’t plug the microwave oven because the entire system is not fully grounded, and it’s not safe for the home’s occupants. You may want to install new additions as you upgrade your appliances into the latest technology and get three-pronged plugs.
-
The Older Standards are not Applicable Anymore
When you decide to switch the covers or remove some outlets, you might discover some bits of black rubber on the surfaces or in the boxes. Other red flags include the wires being covered by cloths instead of plastic. If you’re in an older home, this is prevalent, making the insulation dangerous and inefficient. You need to replace them as soon as possible.
-
Tingling Feeling when you Touch the Switches
Some of the surfaces of your electrical system, like switches and outlets, may be warm to the touch. You might also see a blackened terminal, switch plate, or wire end, and worse, you’re getting a mild shock that makes your skin tingle. The issue might be too much demand on the circuit, and this can be dangerous. If your property was built between 1965 to 1975, know that it can be made up of aluminum wirings. You may want to change this with copper, which can be done with the help of a professional electrician. Read more about the difference between copper and aluminum on this page.
-
Not Safe if you Go Near Water
Places in your house where water is common may include your baths, kitchens, and laundry areas. There are also grounded places like garages and basements where the outlets are required to have protection.
This protection is called Ground Fault Circuit Interrupters, and this is a retrofit installation that will make your house safe and compliant with your local council’s building codes. If these are already installed near your dishwashers and sinks, you may want to press the reset buttons to know if they are properly working or not.
