Roomba robotic vacuums furnish composer improvement but they can get hung up and instrument necessary fix.
Roomba testament talks you something is criminal with a two-tone “uh-oh” vocalize followed by a program of beeps or a narrated say. Construe our article to learn what the message is meant to be, this last Roomba troubleshooting & amend counseling also be accommodative for you. Fault messages can be repeated by imperative the bumper or the Moral fix.
In this Roomba troubleshooting enchiridion, your module informs how to troubleshoot your Roomba including Roomba 805 reviews, charging and firing issues, device fixes, and diagnostic style.
The Roomba Occurrence Messages/Codes Chart
| Indicators | Possible Fixes |
| 1 beep or says “Error one (1).” | Clean debris that may be trapped in the wheel. |
| 2 beeps or says “Error two (2).” | Clean Brushes |
| 5 beeps or says “Error five (5).” | Clean Side Wheels |
| 6 beeps or says “Error six (6).” | Wipe the cliff sensors with a clean, soft and dry cloth. |
| Roomba: Error 8 | Clean Filter |
| 9 beeps or says “Error nine (9).” | Clean Bumper |
| Says “Error ten (10).” | Clean Side Wheels |
| Roomba error 11 | You may need a replacement AeroForce™ bin. |
| Roomba error 14 | Wipe the bin contacts on both the bin and robot with a clean, dry and soft cloth. |
| Roomba error 15 | Press down CLEAN to restart |
| Roomba error 16 | Press down CLEAN to restart. |
| Roomba error 17 | Ensure there were no changes to the environment during the cleaning cycle |
| Roomba error 18 | Ensure the Home Base did not get unplugged, moved, or rotated during the cleaning cycle. |
| 11 beeps with no voice message. | Tap the bumper to confirm it is working correctly. If this error occurs when Roomba is circling, clean the wheels of hair, dirt, and debris. If Roomba is in a very wide room, use a Virtual Wall to create a smaller cleaning portion. |
| 4-beep or speaks “Please charge Roomba.” | Charge your Roomba. If you are experiencing short runtime. |
| Roomba says “Please examine and clean Roomba’s cliff sensors.” | Clean Roomba’s Cliff Sensors |
| Roomba says “Please examine and clean Roomba’s wheels.” | Clean Roomba’s Wheels |
| Roomba narrates “Please remove and clean Roomba’s brushes.” | Clean Main Brushes thoroughly. |
Cleaning Errors
1 Beep / Error 1: Roomba Get Stuck
The Error code number may be the most common problem, and probably because of this iRobot made it the first error.
The Roomba narrates “Error one (1): Move Roomba to a new location then press CLEAN to start.” This usually occurs, due to the Roomba getting stuck or a side wheel hanging or fails to touch the ground.
Other Roomba models might just beep and show the numeral 1 on the unit display screen.
How to Fix: Turn the Roomba over and check the side wheels for obstructions, clear any clogged hair or debris and Push by hand the wheels up and down to make sure they can retract and extend freely. Ensure that each wheel exhibits the same amount of resistance.
2 Beeps / Error 2: The Extractors Cannot Turn
The Roomba says “Error 2: Something must be clogged in the brush rollers if you’re getting this error message. Open Roomba’s brush cage and clean brushes properly and check to make sure there’s no hair or pet fur wrapped around them. Hair is preventing the brushes from spinning properly.
How to Fix: Untangled the hair by following the instructions in this i-Robot official video:
Tip: It is rather boring to clean the brushes on the older Roomba models. Newer Roomba models like the 860 and 960 have replaced the old styles brushes with a bristle-less-rollers, making Roomba maintenance much easier.
5 Beeps / Error 5: Side Wheel
The Roomba will say “Error 5: Spin Roomba’s side wheels to clean.” This error notifies that one of the wheels is stuck, which may be due to a blockage to one of the wheels.
How to fix: Clean any hair and debris out of the wheels and test that the wheels can rotate freely.
6 Beeps / Error 6: Cliff Sensor Errors
The Roomba announces “Error 6”: When you see this error, you might discover it teetering on the edge of the stairs. Rapidly move Roomba to another place then press CLEAN to restart.
How to fix: Wipe the cliff sensors with a soft and dry cloth blast it with compressed air, then just remove the Roomba to a new location and press CLEAN to restart it.
7 Beeps / Error 7: One of the side wheels is stuck.
You’ll receive this error code if the side wheels get something clogged in them. Clear any blockage you find. If dirt got clogged up among the wheels and the chassis. Moreover, you might want to use a regular vacuum cleaner to scrape out whatever got jammed in there.
How to Fix: Check them for blockage, clear the blockage, and push the wheels up and down to loosen any dirt and debris. By hand turn the wheels to make sure they spin freely.
9 Beeps / Error 9: Bumpers Error
The Roomba will say “Error 9: Tap Roomba’s bumpers to clean.” This occurs when the bumpers sensors are grimy or the area between the Roomba unit and the bumpers is dirty.
How to fix: Press on the bumper several times to detach any dirt and make sure it is able to come back into place. If this does not solve the error, you may need to clean the place between the bumpers and the Roomba unit. This will remove any debris and also clean the bumper sensors.
10 Beeps / Error 10: A Side Wheel is Stuck…Again?
- The Wi-Fi connected iRobot Roomba 600 and 800 series narrates “Error ten (10). Spin Roomba’s side wheels to clean. Please open the iRobot HOME App for help.”
- iRobot Roomba 500, 600, 700, and 800 series narrates “Error ten (10). Spin/rotate Roomba’s side wheels to clean.”
How to fix: If the iRobot Roomba get clogged somewhere, normally move it to another place and press and hold CLEAN to reset it. In a different way, check that the side wheels have no blockages obstructing them from spinning. Push the wheels in and out to remove any debris, and turn the wheels by hand to make sure that they are not clogged on something.
11 Beeps / Error 11
“Error 11” is, in summary, the same error as Error 10.
4 Tone empty Battery Sound
“Please charge the Roomba”.
How to Fix: Fully charge the Roomba. Also, follow these steps to lengthen the life of the battery:
Recharge the Roomba as soon as possible after every single use. If your Roomba has the auto-docking option, this will happen automatically. Always try not to leave the Roomba discharged after every vacuuming.
Roomba: Error 14 or 1-4
Roomba 900 series says “Error fourteen (14). Re-install Roomba’s bin then presses CLEAN to restart.”
The Wi-Fi connected Roomba 600 and 800 series says “Error one four (1-4). Please open the iRobot HOME App for help.”
Roomba 600, 700, and 800 series says “Error one four (1-4). Re-install Roomba’s bin then presses CLEAN to restart.”
How to Fix:
Error 14 or 1-4 means Roomba is not detecting an installed bin. Please check the bin contacts:
Confirm that the bin is installed properly.
Wipe the bin contacts on both the bin and robot with a clean, dry cloth.
Roomba: Error 15
Roomba narrates “Error fifteen (15). Press CLEAN to restart.”
How to Fix:
Roomba is facing an internal communication error. Press CLEAN to restart the cleaning job. However, if the problem remains, need a robot reboot.
Roomba: Error 16
Roomba narrates “Error sixteen (16). Keep Roomba on a level surface then press CLEAN to restart.”
How to Fix:
Error 16 means Roomba is not able to start cleaning because it is laid. Move Roomba to a level surface then press CLEAN to restart. Don’t uplift the robot when pressing the CLEAN button. If Roomba says this message on a level surface, reboot the robot.
Roomba: Error 17
Roomba says “Error seventeen (17). Please start the iRobot App for help.”
How to Fix:
Error 17 means Roomba cannot complete and has canceled its current cleaning job.
Ensure there were no changes to the position during the cleaning cycle.
It is possible for iRobot Roomba to run over transitions, like doorway thresholds, that it cannot run over again to leave the place. For this reason, you may need to use Dual Mode Virtual Wall® Barriers to section off these grounds to the cleaning job.
Roomba: Error 18
Roomba says “Error eighteen (18). Please open the iRobot App for help.”
How to Fix:
Error 18 means Roomba cannot come back to the Home Base® or starting position.
Look the Home Base and charging contacts:
Confirm that the Home Base did not get disconnected during the cleaning cycle.
Conclusion
A well- nursed iRobot Roomba can save your ton of hours because it cleans when you’re not at home. This arsenal needs accurate maintenance and care to keep on tooling around your house.
If you ever hear anything harassed, then make sure to check the drive wheels right away. You might want to give your Roomba a proper dusting each week to obstruct error codes from coming up in the first place.
Tags: Roomba 805 reviews
Leave a Reply
You must be logged in to post a comment.