How to Paint Vinyl Windows? Step by Step Guideline

The time may come when you need to restore the faded color of vinyl windows. This is common for boat seats, car dashboards, and upholstery. One can always appeal to new upholstery, but repainting the old one works as long as the vinyl is in good structural shape and has no holes or tears.

Vinyl is one of the best coverings as it offers multiple decorative possibilities and hardly needs maintenance. Do you want to know how to paint vinyl windows? Please keep reading and discover painting vinyl windows.

Although it does not need maintenance, it is interesting to give vinyl a renewal. Over time, it can shave a little, especially if it is very sunny. Your best option in those cases is to paint it, there are some limitations, but as a general rule, you can do it and get very good results.

Painting vinyl windows steps

Step 1

Remove any vinyl objects that will be restored. Remove the item completely, not just the cover that covers it.

Step 2

Remove any additional items you do not want to be painted, such as curtains, buttons, screws, metal parts, etc.

Step 3

Place the object to be painted and restored in a well-ventilated, dust-free area, such as an open garage or studio. Put it on a cloth. Position the cloth in a strategic place so that it receives paint that can escape at the time of painting.

Step 4

Clean all vinyl surfaces. Mix a 3/4 cup solution of mild detergent in four parts water in a 20-gallon bucket. Use a sponge and clean the area of the entire window on which you will paint.

Step 5

Rinse off any soap residue from the vinyl or leather object to be painted and let it dry. Use a dry, lint-free towel to remove excess water.

Step 6

Let the window dry for at least two or three hours.

Step 7

Use blue tape on items that should not be painted or on objects that could not be removed.

Step 8

Dust gently from your object to be painted with the flannel to remove any small dust particles.

Step 9

Shake the cane vigorously for about a minute so that the contents mix well. Hold the can about 10 inches or 10 inches from the surface of the window and apply a first thin layer of spray firmly and moving from front to back. Slightly overlap each spray and always keep the can the same distance from the object throughout the paint application. Leave the first thin layer, almost transparent, so that there is no dripping. If the ink runs, wipe off the tip of the nozzle, move away from the object, and immediately wipe off the drips and drips with the towel.

Final step,

Let the windows dry for at least 15 to 30 minutes. Apply three to five light layers until you no longer see the original faded color and a new, uniform color is obtained.

Tags: How to Paint Vinyl, Windows