One of the most common problems we find at home is the appearance of rust spots such as those of plastic things. Here we will discuss how to remove rust stains from a plastic tub.
Several products for the home, especially salt, lemon, and vinegar, can be effective in removing rust stains from the bathroom. According to the research, plastic tubs are susceptible to the accumulation of colored rust spots due to the mineral content of the bathwater.
Common deposits of iron cause rust spots when exposed to oxygen. Metal products, such as mitigating creams also cause the development of oxide rings. Remove rust stains using an approved ordinary bathroom cleaner to remove rust during weekly bathroom cleaning. Also, use household products to treat stains between regular cleanings. Continue reading: HOW TO CARE OF CERAMIC TILES
How to remove rust stains from the plastic tub?
The passage of time, exposure to air and moisture, or contact with other chemical materials, such as cleaning products, causes the surfaces to lose their initial properties and deteriorate. Rust stains can become real headaches and are that not only appear on metal surfaces but also clothing, floors, or plastics. If you’re faced with a more serious problem, your best off looking into tub repair, rather than attempting it yourself.
Remove shower curtains, carpets, and bath towels before cleaning the bathtub. Approved rust spot cleaners often dye fabrics.
Fill a spray bottle with an approved bath cleaner to treat rust spots. Gently spray the walls of the tub and shower so that all surfaces are covered with the bath cleaner.
Allow the product to sit on the stains for 10 to 15 minutes. Most times the product foam will begin to oxidize as you remove the stain from the plastic.
Rub gently and slowly over the rust spots in a circular manner with a soft bristle brush. Wipe with a paper towel or a soft cleaning towel.
Fill an additional bottle with water and spray the tub and walls of the shower. Wipe with a paper towel or a soft cleaning towel to remove any accumulation of product from the clean tub.
Spot cleaning with household products
Soak cleaning cloths or paper towels with vinegar. Place the towel soaked in vinegar on the rust stains for 10 to 15 minutes. Clean to remove the stain.
Place a stack of basic table salt over any residue of the remaining rust stain. Pour 1 tablespoon of lemon juice over the salt pile. Let the salt and lemon sit on the rust spots overnight.
Clean the salt and lemon residue with a clean cloth. For stubborn stains, gently rub the area with a pumice stone to remove the remaining rust.
Fill a bucket with 1 part vinegar and 3 parts water. Place a plastic cover of the curtain stained with rust on the vinegar. Let rest during the night. Spray with a garden hose.
Rust in plastic or PVC
Plastic is a material susceptible to corrosion. However, the oxide on this surface is very easy to remove: just moisten a rag in a few drops of ether or alcohol and rub on the affected part.
In the case of PVC, it is somewhat more complicated. If the rust has not damaged the PVC protective film, you can remove it with the help of a cloth and a basic cleaning product. If, on the other hand, the oxide has damaged the plastic, you should apply corrosive to PVC with the help of a brush and then rinse with plenty of water.
Eliminate rust It is not difficult to remove the rust that has formed on a plastic floor: put a few drops of either or flammable alcohol on a rag and rub.
Removing rust from PVC is a little more difficult. If you have not damaged the protective film, you can remove it by using a cloth and a generic cleaning product. If the rust has damaged the plastic, apply a PVC solvent with a brush, and rinse thoroughly.Tags: how to remove, plastic tub, rust stains